Machine body: Powder painted orange color
I-type / V-type impulse sealing machines with powder painted surface.
Orange is the color behind the brand. From the very beginning hacona produces all its product with the factory typical orange color. Perfect look that reflects the quality - is one of the key aspects that our engineers have in mind when they develop a product. We do not accept even the slightest compromise in high quality and top appearance.
The entire machine is designed to assure the highest safety. The machine body and the connecting parts are mounted so precisely, that there is not even a single gap between them. No free running cables and no openings on the machine frame. It all serves the safety!
The sealing bar of each I-type / V-type impulse heat sealer is made out of ultra strong magnesium aluminum profile. This technology assures super strong base and absolute flat surface for the special designed industrial impulse sealing wire. In parallel we guarantee with the special designed aluminium ribs inside the sealing bar also a proper and fast cooling of the sealing wires after the sealing cycle is finished.
Machine color and surface treatment: RAL 2004 powder painted [RAL]
IP protection class: IP 31 [IP]
Working safety:
* IP 31 protection class
* The machine corresponds to all effective EU regulations
* The machine has got CE certificate
* Hacona produces all the products according to the ISO 9001 Quality - and ISO 14001 Environmental Control System
V/I – 820 sealing bar set
Heavy duty – industrial sealing bars - dedicated to perfect sealing results
Technical features:
● Sealing length: 820 mm (app. 32 ")
● Sealing width: 8 mm (app. 0,32 ")
● Sealing type: Impulse Bi - Active sealing from two sides (upper and lower sealing bar)
● Sealable max. thickness: 1000 micron
● Sealing bar pressure: min. 20 N/cm2 (29 PSI)
● Equipment: built-in digital temperature sensor
● Version: interchangeable modular sealing bars
● Safety: Build in pintch protection;
Modular Sealing Bag (MSB) technology is an innovation developed by Hacona Packaging which enables the sealing bar width to be changed within two minutes. All temperature, time and closing pressure settings automatically adjust to compensate for the change in width!
The sealing bars of any I/V-type machine is interchangeable (interchangeable sizes: 420 mm(app.16"), 620 mm (app. 24"), 820 mm (app.32"), 1020 mm (app.40") and 1320 mm (app. 52").
The V/I-type sealing bars are made of ultra strong magnesium aluminum profile. This technology assures super strong base and absolute flat surface for the special designed industrial impulse sealing wire. In parallel we guarantee with the special designed aluminium ribs inside the sealing bar also a proper and fast cooling of the sealing wires after the sealing cycle is finished.
ATTENTION: Warranty excludes sealing wire set (sealing wire, silicon rubber and upper and lower PTFE coating of sealing wires) and silicon rubber of pintch protection.
V – Type Big vacuum nozzle for high capacity vacuum (only vacuum)
A flexible solution for high speed vacuum packaging any type of industrial product.
(The vacuum machine has no gas flush option!)
The machine is designed to vacuum air out of big size bags. With the different type and size of external vacuum pumps it is possible to vacuum up to 100 m3 / h air (max. 850 mbar vacuum level) out of the bag (ATTENTION: Depending from the connected vacuum pump type and size!). To operate the machine it is a must to connect an external vacuum pump or connect the machine to an existing vacuum sytem. The vacuum time or vacuum pressure can be adjusted on the controll board (HMI).
This industrial vacuum sealing machine is designed to seal thick packaging films with a maximum material thickness of 1000 micron, or bags which are very contaminated on the inside after filling. Further it is possible to seal very creasy films where the material thickness is in the sealing are very different in material thickness. Thanks to the high sealing pressure the sealing will be even and air tight.
● The sealing bars are pneumaticaly operated
● Machine can seal any type of thermoplastic film or laminated film with a sealable inside
layer where the sealing temperature is between 80 – 230 °C (app. 170 – 440 °F) - with Extra 1 option MAX 260°C (500°F) - temperature.
● Power consumption of the machine: app. 1800 W
(the power consumption depends from the sealing bar size, choosen to the machine!)
● Power consumption in stand by mode: app. 20 W / h
● Intelligent sealing current control (SMPS) with Digital temperature measurement (DTM)
● Machine settings: 5,4" touchdisplay HMI (Human Machine Interface)
● Working cycles can be adjusted and saved in 30 different programs
● Password protected multi level safety system
● Gas flushing function is not included!
In the machine box the following will be included:
● user manual in all cases
● foot pedal if the two-hand start is not ordered
● power cord if stand is not ordered
