Machine body: Silver anodized surface
EI-type professional semi-automaticimpulse sealing machine with silver anodized surface
All EI-type professional impulse sealing machines with electrical foot pedal can be used in food-, pharmaceutical- and in chemical industry. By anodizing (surface treatment) the machine frame, the surface of the aluminium profile gets absolute smooth and strengthened. With this surface treatment the EI-type professional impulse sealing machine frame is now even more resistant against scretches and mechanical impact.
The entire machine is designed to assure the highest safety. The machine body and the connecting parts are mounted so precisely, that there is not even a single gap between them. No free running cables and no openings on the machine frame. It all serves the safety!
The Hacona E-type professional semi-automatic impulse sealer is operated by an electric foot pedal. The sealing bar closing and opening is motorized. Thanks to the revolutionary NEW-ASCC technology-Adapted Sealing Cycle Control we set again new standards worldwide for film sealing machines. The machine is designed for industrial use and for continues work.
The machine body and the sealing bar of the EI-type professional semi-automatic impulse sealer is made out of ultra strong magnesium aluminium profile. This technology assures super strong base and absolute flat surface for the specially designed impulse sealing wire. In parallel we guarantee with the specially designed aluminium ribs inside the frame also a proper and fast cooling of the sealing wires after the sealing cycle is finished.
EU plug
IMPORTANT, always connect grounding!
The mains power supply of the machine is between 220-240 V (50/60 Hz).
Technical data for 620 mm (24 inch) sealing bar length:
Parameters:
Sealing length: max. 620 [mm] (24 inch)
Sealing width: 5 [mm] (0,2 inch)
Max. sealable film width: max. 600 [mm] (23 inch)
Max. cutting length: max. 600 [mm] (23 inch)
Machine size (with open sealing bar): 800 x 215 x 255 [mm] (LxWxH) (31,5 x 8,46 x 10 inch)
Machine size (with closed sealing bar): 800 x 215 x 190 [mm] (LxWxH) (31,5 x 8,46 x 7,5 inch)
EBD-type professional impulse sealer with Bi-Active sealing
Sealing width: 2x5 [mm] (2x0,2 inch) double Bi - Active
Max. thickness of film: 2 x 400 [micron] PE
Sealable films [Absolute thickness]:
max. 800 micron - PE-Polyethylene
max. 800 micron - PP-Polypropylene
max. 700 micron - PVC-Polyvinyl Clorid
max. 800 micron - BOPP-Biaxal Oriented Polypropylene
max. 800 micron - PA coated films, that have inside sealable film. Other laminated films, that have inside sealable film.
Max. sealing temperature: 230 [°C]
Max. sealing time: 9 [sec.]
Sealing time: The sealing time can be digital adjusted on a scale from 0 sec - 9 sec. The sealing time depends largely on the type and the thickness of the sealable material!
The machine is equipped with a digital temperature sensor and the temperature can be set between 70-230 [°C].
The cooling cycle can be adjusted with two functions. Cooling by time from 0-9 value. Cooling by temperature control, where the set value can be in temperature range between 10-200 [°C].
Machine capacity: max. 300 [sealing/hour]
Electrical connection: 230 [V], [50/60 Hz]
Machine Max. Power: 4000 [W] - max. capacity
Machine consumption: (in standby mode) 20 [W]
Consumption information: The E-type professional semi-automatic impulse sealer is working according to impulse operating principle. The machine is always in stand by mode and consumes only 20 W/h (power consumption). The sealing wire only heats up during the sealing process. During the sealing process the consumption of the machine is max. 2600 W.
Electric cable length: 250 [cm] (100 inch)
Power: 16 [A]
Cutting with safety knife: The safety knife cuts the tubular film 7,5 mm (0,3 inch) above the sealing.
